Journal
Home Lighting Ideas

By LightDekho editorial team

How to Choose LED Lights for a 2 BHK Flat in Mumbai

5 min read
LightDekho decorative lighting shown in a living-room setting
LightDekho decorative lighting shown in a living-room setting

Where should a 2 BHK lighting plan start?

Start with a measured furniture plan. Mark seating, dining, beds, wardrobes, kitchen counters and work areas. Note windows, fan positions and existing electrical points. Two flats with the same number of bedrooms can need very different layouts.

For a Mumbai renovation, also establish whether the ceiling will remain exposed or have a false ceiling. Surface fixtures and recessed fixtures have different installation requirements; decide this before choosing a fitting.

How should you light the living and dining area?

Use a general layer for movement and cleaning, then add light where you read or work. A decorative fixture can define the dining area, while a lamp or wall light can serve seating. Do not assume a chandelier alone will provide even light in every corner.

Imagine an evening with the TV on: avoid a bright source reflected on the screen or directly in the seated viewer’s eyes. Test the intended positions and keep decorative and general lights on separate controls where practical.

What do the bedrooms and study corner need?

Provide comfortable general light plus an independently controlled reading or desk light. Place reading light so the body does not cast a shadow over the page. For a wardrobe, check visibility inside the storage rather than simply adding a brighter centre light.

Choose colour temperature using samples and your preference for the room. Confirm consistent colour across fixtures meant to be used together. If you want dimming, select compatible fixtures and controls as a set.

How should kitchen and bathroom lighting differ?

Kitchen preparation needs light on the worktop, not only behind the person cooking. Check whether an under-cabinet or other task light can illuminate the counter without a visible harsh source.

Bathroom fittings must suit their installation position and exposure to moisture. Ask a qualified installer to confirm the required protection and safe placement. Do not put an ordinary decorative fitting near water unless its rating and installation instructions permit it.

What should you bring to a Vashi showroom?

Bring room dimensions, ceiling height, the furniture plan, ceiling photographs and a list of existing switches. Note the finish you prefer and whether installation is a retrofit. Ask for delivered lumens, dimensions, mounting details and compatible controls for each shortlisted fixture.

Conclusion: buy a coordinated lighting plan, not the same fitting for every room. Explore the catalogue for decorative options, then enquire with your measurements so the showroom can confirm suitability and current availability.

Further reading & sources

Explore lighting for your room

FAQ

Frequently asked

How many LED lights does a 2 BHK need?
There is no reliable fixed count. Room sizes, fixture output, beam spread, ceiling height and activities all affect the layout.
Do I need a false ceiling for LED lighting?
No. Surface-mounted fixtures can work without one. Recessed fittings need suitable space and mounting provisions.
Can I keep existing switches?
Possibly, but an electrician should check circuit capacity, wiring and any dimmer or smart-control compatibility before changes.
Planning your lighting?

Enquire about lighting for your home.

Share your room measurements and ceiling photographs with LightDekho in Vashi, Navi Mumbai. Confirm suitable fittings and current availability with our team.

Continue reading

Related guides